The 533 Piston bearing is molded with 33% heat stabilized, glass reinforced Nylon 66. The design of the 533T is a “t-shape” cross section which allows full bearing contact while also offering the advantage of a t-groove form of retention that does not require side land near the working surface of the wear band. The 533T is typically used in telescopic cylinder applications. It is not suitable for use in applications where water based fluids are used, nor is it suitable in applications where significant water is present, due to the swell of the nylon.
• Moulded to size
• Easy installation
• Long life
- Not Suitable
* For fluid types marked as possible, please call our team of experts on +49 (0)40 73 47 48-0 to talk through your requirements and determine if this seal is the most suitable for your needs.
|Dynamic application||Static application|
|Fluids based on mineral oil|
|HFA (5/95)||Not suitable||Not suitable|
|HFB (60/40 invert emulsion)||Not suitable||Not suitable|
|HFC (water glycol)||Not suitable||Not suitable|
|Water||Not suitable||Not suitable|
|Other fluid types|
|HFD (Phosphate ester ARYL Type)||Recommended||Possible|
|Synthetic esters (HEES, HFDU)||Recommended||Possible|