Characteristics and performance

This widely used spring-energized seal offers performance benefits ranging from enhanced media compatibility to superior performance in broad temperature ranges.

The basic design consists of a U-shaped jacket made from inert thermoplastic materials specifically selected for the application. The addition of a metal spring actuates the jacket material used in the system, which provides sealing at low system pressures. At higher system pressures, the seal becomes pressure-energized by the fluid media—a sealing combination that ensures adequate sealing throughout the entire pressure range.

By coupling the OptiSeal® system with other specialty components such as anti-extrusion devices, PakRings, V-Rings, adapters, bushings, and bearings, users can achieve an expanded operational envelope.

Product details

With diameters from 0.040in (1mm) to 110in (2.8m), customisable heights and special geometries, the OptiSeal® system can be configured to fit in almost any hardware, making it the ideal choice for critical-service sealing.

For a comprehensive guide of jacket and spring materials, spring types, lip profiles, custom configurations and back-up components download the OptiSeal® System Design Guide.

Ask an expert

* Max pressure stated is dependant on the material variant selected. Please consult the datasheet for further information.

Key:
  • Recomended
  • Possible
  • Not suitable

* For fluid types marked as possible, please call our team of experts on +49 (0)40 73 47 48-0 to talk through your requirements and determine if this seal is the most suitable for your needs.

 Dynamic applicationStatic application
Fluids based on mineral oil  
AnyRecommendedRecommended
Waterbased fluids  
HFA (5/95)PossiblePossible
HFB (60/40 invert emulsion)PossiblePossible
HFC (water glycol)PossiblePossible
WaterPossiblePossible
Other fluid types  
Air/NitrogenPossiblePossible
HFD (Phosphate ester ARYL Type)PossiblePossible
Synthetic esters (HEES, HFDU)PossiblePossible