Characteristics and performance
Design O-rings are a simple but very versatile seal. They are most commonly used for static applications, and for pressures over 1500 p.s.i are used with back up rings. O-rings in NBR and FKM are suitable for use in mineral oil, water and air, FKM O-rings are also suitable for use in most aggressive fluids and in temperatures of up to 200°C/390°F.
O-rings with sizes to AS-568A are available in NBR 70 and 90 Shore A compounds and in FKM 75 Shore A.
To view our O-ring range including part numbers and technical data, please download the supplied datasheet by clicking here.
For further information about our O-ring products, please contact your local Hallite sales office.Ask an expert
* Max pressure stated is dependant on the material variant selected. Please consult the datasheet for further information.
- Not suitable
* For fluid types marked as possible, please call our team of experts on +39 (0)58 642 8287 to talk through your requirements and determine if this seal is the most suitable for your needs.
|Dynamic application||Static application|
|Fluids based on mineral oil|
|HFA (5/95)||Not suitable||Possible|
|HFB (60/40 invert emulsion)||Not suitable||Possible|
|HFC (water glycol)||Not suitable||Possible|
|Other fluid types|
|HFD (Phosphate ester ARYL Type)||Not suitable||Not suitable|
|Synthetic esters (HEES, HFDU)||Not suitable||Recommended|