533G

Design
The Hallite 533G bearing is a version of the Hallite 533, which has axial grooves to allow fluid bypass. This bearing is most often used in hydraulic ram application where such a feature is required. Like the standard 533 bearing the 533G is compatible with hydraulic and lubricating oil. It is not suitable for use in applications where water based fluids are used, nor is it suitable in applications where significant water is present, because of the swell of the nylon.

Split Type
B indicates butt cut
S indicates scarf cut
NB Some sizes are rod specific only

Note: Metric sizes are also available upon request. For further information about these and any other sizes that you are looking for, please contact your local Hallite sales office.

Features
•  Moulded to size
•  Easy installation
•  Robust
•  Long life
•  Economical

  • Unit of measurement:
Unit of measurement:

Temp range

-40°C
120°C

Max speed

5m/sec
Key:
  • Recomended
  • Possible
  • Not Suitable

* For fluid types marked as possible, please call our team of experts on +44 208 941 2244 to talk through your requirements and determine if this seal is the most suitable for your needs.

  Dynamic application Static application
Fluids based on mineral oil    
Any Recommended Possible
Waterbased fluids    
HFA (5/95) Not suitable Not suitable
HFB (60/40 invert emulsion) Not suitable Not suitable
HFC (water glycol) Not suitable Not suitable
Water Not suitable Not suitable
Other fluid types    
Air/Nitrogen Recommended Possible
HFD (Phosphate ester ARYL Type) Recommended Possible
Synthetic esters (HEES, HFDU) Recommended Possible