Hallite 87, 506 & 533 bearing strip

Hallite 87 strip is a low friction bronze filled PTFE compound produced in a flat tape style ready for easy cutting to size to suit individual applications and is particularly effective in friction conscious applications such as servo cylinders.

Hallite 506 can be supplied in spiral lengths, generally in 10 metre, as individual cut bearings and also in 10 metre lengths packed flat in a box dispenser. Hallite 506 bearing strip is manufactured to extremely accurate thickness tolerances, ensuring reliable cylinder alignment. Other sizes of type 506 are available on request, special sections and diameters can also be produced to suit individual requirements.

Bearing typeStandard material
87PTFE + bronze
506Polyester + PTFE
533GFN

Bearing strip housing tolerances

 As tolerances are not specified “on line” for types 87 & 506, please refer to the information below and on the next page for tolerances as indicated on the product’s data sheet.

Bearing strip housing tolerances Bearing stress versus strain

Hallite 506 specified tolerances
Bearing lengthBearing cross section
L1S
Tolerances (in)-0.005 to -0.025-0.001 to -0.003
Tolerances (mm)-0.1 to -0.6-0.02 to -0.08
Hallite 533 specified tolerances
Bearing lengthBearing cross section
L1S
Tolerances (in)-0.1 to -0.6-0.000 to -0.010
Tolerances (mm)-0.1 – -0.5+0.03 to -0.05