ELA

The Hallite ELA rod wiper/excluder uses a single aggressive wiping lip that provides ingression protection. The ELA wiper uses an o-ring energizer to keep the wiper centered, helping to compensate for potential side-to-side movement in the application. Typically made from exclusive Hallite Armorlene® materials, this seal is capable of high-speed applications and eliminates any potential for stick-slip. The ELA wiper is a low-friction design, making it an energy-efficient choice. The ELA wiper follows ISO 6195, Type D dimensions.

The part numbers listed below only show standard material options for both the face seal and energizer, where applicable. For a complete list of the material and energizer options along with part numbering structure, please see the complete PDF datasheet or click ELA Data Tables.
  • Unit of measurement:
Unit of measurement:

Temp range

-45°C
200°C

Max speed

4m/sec
Key:
  • Recomended
  • Possible
  • Not Suitable

* For fluid types marked as possible, please call our team of experts on +1 248 668 5220 to talk through your requirements and determine if this seal is the most suitable for your needs.

  Dynamic application Static application
Fluids based on mineral oil    
Any Recommended Recommended
Waterbased fluids    
HFA (5/95) Recommended Recommended
HFB (60/40 invert emulsion) Recommended Recommended
HFC (water glycol) Recommended Recommended
Water Recommended Recommended
Other fluid types    
Air/Nitrogen Recommended Recommended
HFD (Phosphate ester ARYL Type) Recommended Recommended
Synthetic esters (HEES, HFDU) Recommended Recommended