Characteristics and performance

The Hallite 513 is a standard profile loaded U-cup with precision trimmed sealing lips manufactured in either a polyurethane or polyester shell energised by a high quality O-ring and designed for common North American grooves. The sealing lips are trimmed at an angle to give optimal rod sealing performance. In most cases, the deep profile of the Hallite 513 provides extra stability needed to resist rolling in the groove. Together these features result in improved life and sealing.

At zero or low pressure, the O-ring helps to increase the sealing force preventing any bypass. Under most conditions as the pressure rises, the sealing force increases and the O-ring ensures complete lip actuation.

The symmetry of the Hallite 513 makes it ideally suited for single-acting rod and piston applications. However, the Hallite 513 is not recommended for use in back-to-back double-acting applications.

Product details

Ask an expert

Max pressure *

350 Bar

Temp range

-40°C
110°C

Max speed

0.5m/sec

* Max pressure stated is dependant on the material variant selected. Please consult the datasheet for further information.

Key:
  • Recomended
  • Possible
  • Not suitable

* For fluid types marked as possible, please call our team of experts on +86 (0)21 3351 7272 to talk through your requirements and determine if this seal is the most suitable for your needs.

 Dynamic applicationStatic application
Fluids based on mineral oil  
AnyRecommendedRecommended
Waterbased fluids  
HFA (5/95)PossiblePossible
HFB (60/40 invert emulsion)RecommendedRecommended
HFC (water glycol)Not suitableNot suitable
WaterPossiblePossible
Other fluid types  
Air/NitrogenPossiblePossible
HFD (Phosphate ester ARYL Type)Not suitableNot suitable
Synthetic esters (HEES, HFDU)RecommendedPossible