双作用活塞密封

The Hallite 454 double acting piston seal design, with a filled PTFE face ring, provides the designer with a compact, low friction seal for light to medium duty hydraulic cylinders.

The Hallite 455 double acting piston seal design, with a filled PTFE face ring, provides the designer with a compact, low friction seal for light to medium duty hydraulic cylinders.

The Hallite 50 comprises of a rubber seal, two split support rings and two split bearings, located either side of the seal. The nitrile rubber seal has proved itself to be extremely wear resistant in service.

The Hallite 51 is a heavy duty piston seal which, when installed in pairs, provides an excellent double acting piston design. It is particularly suitable for difficult operating conditions such as pressure surging, vibration or some misalignment.

The Hallite 52 is a two piece piston seal for heavy duty applications which, when installed in pairs, provides an excellent double-acting piston design. It is suitable for difficult operating conditions such as pressure surging, vibration or some misalignment.

A robust assembly designed specifically for one piece pistons, the Hallite 53 double acting seal uses a rubber sealing element which has proved itself in service to be extremely wear resistant and capable of working most effectively in a wide variety of medium duty applications.

The Hallite 54 double acting piston seal design, with a filled PTFE face ring, provides the designer with a compact, low friction seal for light to medium duty hydraulic cylinders.

A medium to heavy duty double acting seal, the Hallite 56 has shown itself over many years to be an effective and robust piston seal in a wide variety of applications.

The combined nature of this seal enables the designer to use large clearances and, with the integral bearing rings, to restrict the piston length.

A robust seal assembly designed specifically for one piece pistons, the Hallite 64 double acting seal uses a rubber sealing element which has proved itself in service to be extremely wear resistant and capable of working most effectively in a wide variety of medium to heavy duty applications.

Ideal for light duty one piece piston applications, the Hallite 65 double acting seal is a simple, effective and economical design for pressures up to 160 bar/2500 p.s.i. its compact dimensions enable the designer to keep the length of the piston to a minimum. It is an assembly of a continuous rubber seal and two scarf cut bearings.

A robust seal assembly designed specifically for one piece pistons, the Hallite 68 double acting seal uses a rubber sealing element which has proved itself in service to be extremely wear resistant and capable of working most effectively in a wide variety of medium to heavy duty applications.

The Hallite 714 double-acting piston seal is a compact seal for medium to heavy-duty applications.

The Hallite 730 double-acting piston seal in a four part assembly is designed for use in heavy-duty applications where position holding ability is important, such as longwall mining roof support applications using water-based fluids and large diameter crane cylinders using standard hydraulic oils.

Hallite 735 is a compact double-acting piston seal assembly designed for one piece pistons and is suitable for low to high pressure, medium to heavy duty applications.

The Hallite 754 is comprised of a tough, wear-resistant thermoplastic elastomer face seal which is pre-loaded by a NBR O-ring. The face material comes in a number of material options to extend operating conditions. The housing width allows a narrow width piston to be used.

The Hallite 755 double-acting piston seal is a compact, low friction seal for light to medium duty applications designed originally to fit North American NFPA groove standards.

The Hallite 764 double-acting piston seal is a compact, low friction seal for light to medium duty applications.

Ideal for light duty one piece piston applications, the Hallite 77 seal is a simple, effective and economical design.

The Hallite 770 double-acting piston seal is a compact, low friction seal for light to medium-duty applications designed to fit standard inch O-ring housings.

Characteristics and performance The Hallite 775 double-…

The Hallite 777 double-acting, energised piston seal is a compact seal for medium to heavy-duty applications designed to fit a range of industry standard grooves making it ideal for retrofitting existing products.

The Hallite 780 double-acting piston seal in a robust five part assembly is designed specifically for one piece pistons in a wide range of medium duty applications. The seal is also suitable for two piece pistons.

The Hallite 83 Tri-Seal assembly offers the engineer many advantages when considering the design of cast iron, bronze, alloy etc.

The Hallite Capped T maximizes performance by employing thicker anti-extrusion rings that protect the seal face and energizer from damaging high-pressure shocks well beyond what standard industry designs are capable of.

The Hallite G54 is a double-acting, o-ring energized, low-friction piston seal that performs well in both high and low-pressure systems.

The Hallite GP2 is a double-acting piston seal utilizing Hallite’s proprietary high- performance Armorlene® HLX PTFE paired with twin premium o-ring energizers and an x-ring for optimum performance and durability.

The Hallite GPS is a double-acting piston seal utilizing Hallite’s high-performance Armorlene® HLX PTFE paired with an elastomer energizer and x-ring for optimum performance and durability.

High-performance Armorlene® materials, like HLX, provide outstanding wear and extrusion-resistance properties as well as large range of temperature and media compatibility.

The Hallite PCA is a double-acting piston seal that performs well in both high- and low-pressure systems.

The Hallite PCG is a double-acting, o-ring energized, low-friction piston seal designed for low- and medium-pressure systems.

The Hallite PDS is a double-acting low-friction piston seal solution for compact o-ring grooves, that extends the service range above what an o-ring alone is capable of supporting.