Characteristics and performance
The Hallite 775 double-acting piston seal is a compact seal for light to medium-duty applications and designed to fit two housing standards; one for standard O-ring grooves, the second for grooves designed for an O-ring and two back-up rings. The advanced face geometry gives the Hallite 775 single-acting capabilities making it an excellent choice for double-acting applications where minimal dynamic leakage is required.
Comprised of a tough polyurethane face seal which is pre-loaded by a rectangular cross-section NBR expander, the standard material is suitable for hydraulic mineral oil applications.
Product details
Ask an expert
Max pressure *
Temp range
Max speed
* Max pressure stated is dependant on the material variant selected. Please consult the datasheet for further information.
- Recomended
- Possible
- Not suitable
* For fluid types marked as possible, please call our team of experts on +39 (0)58 642 8287 to talk through your requirements and determine if this seal is the most suitable for your needs.
| Dynamic application | Static application | |
|---|---|---|
| Fluids based on mineral oil | ||
| Any | Recommended | Recommended |
| Waterbased fluids | ||
| HFA (5/95) | Not suitable | Not suitable |
| HFB (60/40 invert emulsion) | Not suitable | Not suitable |
| HFC (water glycol) | Not suitable | Not suitable |
| Water | Not suitable | Not suitable |
| Other fluid types | ||
| Air/Nitrogen | Possible | Possible |
| HFD (Phosphate ester ARYL Type) | Not suitable | Not suitable |
| Synthetic esters (HEES, HFDU) | Recommended | Recommended |
