I set Vee Pack sono tenute con multi labbra, di solito composte di un adattatore maschio e femmina e un gruppo di tre o cinque Vee Rings, sono richiesti per stelo e pistone in medie e pesanti applicazioni per cilindri a singolo e doppio effetto.
07Max pressure700 Bar
Temp range-30°C
100°C
Max speed0.5m/sec
The Hallite 07 is a multi lip rod seal, for medium to heavy duty applications, composed of a header ring, vee rings and a female adapter. The header ring is the primary seal. It is a bonded construction of rubberised fabric vee ring and rubber. When installed the section is pre-loaded to seal at low… |
07 |
| Max pressure | 700 Bar |
| Temp range | -30°C to 100°C |
| Max speed | 0.5m/sec |
09Max pressure400 Bar
Temp range-30°C
100°C
Max speed0.5m/sec
Hallite 09 vee packings incorporates the Hallite 08 vee ring manufactured from fabric reinforced high grade nitrile rubber, which is normally used in multiples in a set with a male and female adaptor. The parts are ‘stacked’ together and must be lubricated liberally with clean operating fluid prior to assembly. The packing must be axially… |
09 |
| Max pressure | 400 Bar |
| Temp range | -30°C to 100°C |
| Max speed | 0.5m/sec |
11Max pressure400 Bar
Temp range-30°C
100°C
Max speed0.5m/sec
The Hallite 11 is a vee pack rod seal for medium duty applications offering excellent performance and long life even under difficult operating conditions such as pressure surges, vibration and some misalignment. The seal consists of a male and female adaptor and 5 vee rings. The male adaptor is usually manufactured from polyacetal but some… |
11 |
| Max pressure | 400 Bar |
| Temp range | -30°C to 100°C |
| Max speed | 0.5m/sec |
13Max pressure700 Bar
Temp range-30°C
100°C
Max speed0.5m/sec
The Hallite 13 is a Vee pack rod seal for heavy duty applications offering excellent performance and long life even under difficult operating conditions such as pressure surges, vibration and some misalignment. The seal assembly consists of a male and female adaptor and 5 vee rings. The male adaptor is usually manufactured form polyacetal but… |
13 |
| Max pressure | 700 Bar |
| Temp range | -30°C to 100°C |
| Max speed | 0.5m/sec |
14Max pressure700 Bar
Temp range-30°C
100°C
Max speed0.5m/sec
The Hallite 14 is a vee pack rod seal for heavy duty applications offering excellent performance and long life even under difficult conditions such as pressure surges, vibration and some misalignment. The seal consists of a male and female adaptor and three vee rings. The male adapter is usually manufactured from polyacetal but some of… |
14 |
| Max pressure | 700 Bar |
| Temp range | -30°C to 100°C |
| Max speed | 0.5m/sec |