Characteristics and performance

The Hallite 775 double-acting piston seal is a compact seal for light to medium-duty applications and designed to fit two housing standards; one for standard O-ring grooves, the second for grooves designed for an O-ring and two back-up rings. The advanced face geometry gives the Hallite 775 single-acting capabilities making it an excellent choice for double-acting applications where minimal dynamic leakage is required.

Comprised of a tough polyurethane face seal which is pre-loaded by a rectangular cross-section NBR expander, the standard material is suitable for hydraulic mineral oil applications.

Product details

 

Ask an expert

Max pressure *

350 Bar

Temp range

-30°C
110°C

Max speed

1m/sec

* Max pressure stated is dependant on the material variant selected. Please consult the datasheet for further information.

Key:
  • Recomended
  • Possible
  • Not suitable

* For fluid types marked as possible, please call our team of experts on +39 (0)58 642 8287 to talk through your requirements and determine if this seal is the most suitable for your needs.

 Dynamic applicationStatic application
Fluids based on mineral oil  
AnyRecommendedRecommended
Waterbased fluids  
HFA (5/95)Not suitableNot suitable
HFB (60/40 invert emulsion)Not suitableNot suitable
HFC (water glycol)Not suitableNot suitable
WaterNot suitableNot suitable
Other fluid types  
Air/NitrogenPossiblePossible
HFD (Phosphate ester ARYL Type)Not suitableNot suitable
Synthetic esters (HEES, HFDU)RecommendedRecommended