IN70004 Instructions for Contractors HSE
…Policy before the contract commences. All work carried out by the contractor must comply with the Health & Safety at Work Act 1974, all associated regulations, approved codes of practices…
OptiSeal®…the ideal choice for critical-service sealing. For a comprehensive guide of jacket and spring materials, spring types, lip profiles, custom configurations and back-up components download the OptiSeal® System Design Guide…. | OptiSeal® |
83Max pressure400 Bar Temp range-30°C 100°C Max speed0.5m/sec …the least being cost effectiveness with long and efficient seal life. The Tri-Seal consists of two split plastic anti-extrusion rings and a nitrile synthetic rubber sealing member. Under pressure, the… | 83 |
Max pressure | 400 Bar |
Temp range | -30°C to 100°C |
Max speed | 0.5m/sec |
720Max pressure350 Bar Temp range-30°C 100°C Max speed1m/sec Characteristics and performance The Hallite 720 solves difficult assembly problems and can be a cost-effective alternative to the traditional piston assembly which has a separately fitted seal and bearing(s). This… | 720 |
Max pressure | 350 Bar |
Temp range | -30°C to 100°C |
Max speed | 1m/sec |
AEON® springs…Progressive spring rate Self-damping properties Silent operation Easy installation Maintenance free Long life and excellent fatigue characteristics Product details Typical dimensions of AEON® rubber springs are listed in the datasheet,… | AEON® springs |
71Max pressure700 Bar Temp range-30°C 100°C Max speed0.5m/sec …to a minimum and allowing the designer to use compact, strong, cost effective steel pistons. The inherent nature of the material enables it to settle to the bore size once… | 71 |
Max pressure | 700 Bar |
Temp range | -30°C to 100°C |
Max speed | 0.5m/sec |
730Max pressure700 Bar Temp range-40°C 110°C Max speed0.3m/sec …mining roof support applications using water-based fluids and large diameter crane cylinders using standard hydraulic oils. Comprised of a tough, wear resistant thermoplastic polyester elastomer (TPE) face seal pre-loaded by… | 730 |
Max pressure | 700 Bar |
Temp range | -40°C to 110°C |
Max speed | 0.3m/sec |
58Max pressure700 Bar Temp range-30°C 100°C Max speed0.5m/sec Characteristics and performance The combined nature of this seal enables the designer to use large clearances and, with the integral bearing rings, to restrict the piston length. The assembly comprises… | 58 |
Max pressure | 700 Bar |
Temp range | -30°C to 100°C |
Max speed | 0.5m/sec |
56Max pressure500 Bar Temp range-30°C 100°C Max speed0.5m/sec …contact with the cylinder surface. The centre of the seal is rubber which is bonded to two ‘U’ section bases of rubberised fabric, and is compressed by the housing to… | 56 |
Max pressure | 500 Bar |
Temp range | -30°C to 100°C |
Max speed | 0.5m/sec |
87 bearingTemp range-50°C 200°C Max speed5m/sec …The low friction PTFE material reduces ‘stick slip’ between moving parts. The material is compatible with hydraulic mineral oil, lubricating oil, water based and synthetic fire resistant fluids and lubricating… | 87 bearing |
Temp range | -50°C to 200°C |
Max speed | 5m/sec |
565Temp range-40°C 120°C Max speed5m/sec Characteristics and performance The Hallite 565 range provides outstanding performance across a range of fluid power applications and duty. Moulded on advanced tooling platforms, and innovative in their composition of… | 565 |
Temp range | -40°C to 120°C |
Max speed | 5m/sec |
860Temp range-40°C 100°C Max speed1m/sec Characteristics and performance The Hallite 860 single-lipped, metal-cased wiper is designed to press fit into open groove housings for a wide range of applications. The precision trimmed polyurethane wiping element… | 860 |
Temp range | -40°C to 100°C |
Max speed | 1m/sec |
864Temp range-45°C 110°C Max speed1m/sec Characteristics and performance The Hallite 864 is a double-lipped, metal-cased wiper is designed to press fit into open groove housings of popular Asian housing sizes for a wide range of… | 864 |
Temp range | -45°C to 110°C |
Max speed | 1m/sec |