Utiliser les tableaux ci-dessous pour déterminer les matériaux adaptés à l’environnement de votre système et aux conditions de service. Si vous avez besoin d’informations sur des produits spécifiques, vous pouvez les trouver par le moteur de recherche ou naviguer le site.
| Materials | Continuous material service temperature range °C | Intermitent material service temperature range °C | Motor Oils | Hypoid Oils | Automatic Transmission Fluid | IISO 6743-4 Hydraulic oils (HL, HM, HV) |
|---|---|---|---|---|---|---|
| +150 -40 | +150 -40 | +160 -50 | +100 -30 | |||
| Maximum continous service temperature in fluids °C | ||||||
| NBR 70 IRH NBR 90 IRHD Nitrile (medium) | +100 -30 | +120 -30 | +100 | +90 | +100 | +100 |
| FKM 75 IRHD FKM 90 IRHD Fluoro-elastomer | +200 -20 | +250 -20 | +150 | +150 | +160 | +100 |
| EPDM 70 IRHD EPDM 80 IRHD | +120 -50 | +150 -50 | NS | NS | NS | NS |
| VMQ 70 IRHD Silicone | +200 -55 | +250 -55 | * | * | * | * |
| HNBR 75 IRHD Hydrogenated nitrile | +130 -30 | +150 -30 | +130 | +110 | +130 | +100 |
| IIR Butyl | +120 -40 | +140 -40 | NS | NS | NS | NS |
| FFKM Perfluoro-elastomer | +200 -20 | +300 -40 | +150 | +150 | +160 | +100 |
| AU Polyester PU | +100 -30 | +110 -30 | +100 | +100 | +100 | +100 |
| EU Polyether PU | +100 -40 | +110 -45 | +100 | +100 | +100 | +100 |
| Polyester-elastomer | +100 -40 | +120 -40 | +100 | +100 | +100 | +100 |
| PA Polyamide | +100 -40 | +120 -40 | +100 | +100 | +100 | +100 |
| POM Acetal | +100 -45 | +120 -40 | +100 | +100 | +100 | +100 |
| PPS Polyphenylene sulphide | +200 -40 | +200 -40 | +150 | +150 | +160 | +100 |
| PTFE Polytetra-fluoroethylene | +200 -200 | +200 -200 | +150 | +150 | +160 | +100 |
| Thermosetting Polyester Resin | +100 -50 | +130 -200 | +100 | +100 | +100 | +100 |
| PEEK Polyether-etherketone | +250 -65 | +300 -65 | +150 | +150 | +160 | +100 |
| Materials | Continual material service temperature range C | Intermitent material service temperature range C | Motor Oil based greases | Silicon oil greases |
|---|---|---|---|---|
| +100 -30 | +250 -50 | |||
| Maximum continous service temperature in fluids °C | ||||
| NBR 70 IRH NBR 90 IRHD Nitrile (medium) | +100 -30 | +120 -30 | +100 | +100 |
| FKM 75 IRHD FKM 90 IRHD Fluoro-elastomer | +200 -20 | +250 -20 | +100 | +200 |
| EPDM 70 IRHD EPDM 80 IRHD | +120 -50 | +150 -50 | NS | +120 |
| VMQ 70 IRHD Silicone | +200 -55 | +250 -55 | +100 | * |
| HNBR 75 IRHD Hydrogenated nitrile | +130 -30 | +150 -30 | +100 | +130 |
| IIR Butyl | +120 -40 | +140 -40 | NS | +120 |
| FFKM Perfluoro-elastomer | +200 -20 | +300 -40 | +100 | +200 |
| AU Polyester PU | +100 -30 | +110 -30 | +100 | +100 |
| EU Polyether PU | +100 -40 | +110 -45 | +100 | +100 |
| Polyester elastomer | +100 -40 | +120 -40 | +100 | +100 |
| PA Polyamide | +100 -40 | +120 -40 | +100 | +100 |
| POM Acetal | +100 -45 | +120 -40 | +100 | +100 |
| PPS Polyphenylene sulphide | +200 -40 | +200 -40 | +150 | +200 |
| PTFE Polytetra-fluoroethylene | +200 -200 | +200 -200 | +100 | +200 |
| Thermosetting Polyester Resin | +100 -50 | +130 -200 | +100 | +100 |
| PEEK Polyether-etherketone | +250 -65 | +300 -65 | +100 | +250 |
| Materials | Continual material service temperature range C | Intermitent material service temperature range C | Diesel Fuel | Fuel for gasoline/petrol engines - normal | Fuel for gasoline/petrol engines - super |
|---|---|---|---|---|---|
| Maximum continous service temperature in fluids °C | |||||
| NBR 70 IRH NBR 90 IRHD Nitrile (medium) | +100 -30 | +120 -30 | * | * | * |
| FKM 75 IRHD FKM 90 IRHD Fluoro-elastomer | +200 -20 | +250 -20 | +150 | +150 | +150 |
| EPDM 70 IRHD EPDM 80 IRHD | +120 -50 | +150 -50 | NS | NS | NS |
| VMQ 70 IRHD Silicone | +200 -55 | +250 -55 | NS | NS | NS |
| HNBR 75 IRHD Hydrogenated nitrile | +130 -30 | +150 -30 | * | * | * |
| IIR Butyl | +120 -40 | +140 -40 | NS | NS | NS |
| FFKM Perfluoro-elastomer | +200 -20 | +300 -40 | +150 | +150 | +150 |
| AU Polyester PU | +100 -30 | +110 -30 | +60 | +60 | +60 |
| EU Polyether PU | +100 -40 | +110 -45 | +60 | +60 | +60 |
| Polyester elastomer | +100 -40 | +120 -40 | +60 | +60 | +60 |
| PA Polyamide | +100 -40 | +120 -40 | +100 | +100 | +100 |
| POM Acetal | +100 -45 | +120 -40 | +100 | +100 | +100 |
| PPS Polyphenylene sulphide | +200 -40 | +200 -40 | +150 | +150 | +150 |
| PTFE Polytetra-fluoroethylene | +200 -200 | +200 -200 | +150 | +150 | +150 |
| Thermosetting Polyester Resin | +100 -50 | +130 -200 | +100 | +100 | +100 |
| PEEK Polyether-etherketone | +250 -65 | +300 -65 | +150 | +150 | +150 |
| Materials | Continual material service temperature range C | Intermitent material service temperature range C | ISO 6743-4 HFA-Fluids (5/95 Waterbased) | ISO 6743-4 HFB-Fluids (60/40 Invert emulsion) | ISO 6743-4 HFC-Fluids (Water glycol) | ISO 6743-4 HFDR-Fluids (phosphate ester ALKYL (Aero)) | ISO 6743-4 HFDR-Fluids (phosphate ester ARYL (ind.)) |
|---|---|---|---|---|---|---|---|
| +60 +5 | +60 +5 | +60 -30 | +100 -50 | +150 -0 | |||
| Maximum continous service temperature in fluids °C | |||||||
| NBR 70 IRH NBR 90 IRHD Nitrile (medium) | +100 -30 | +120 -30 | +60 | +60 | +60 | NS | NS |
| FKM 75 IRHD FKM 90 IRHD Fluoro-elastomer | +200 -20 | +250 -20 | +60 | +60 | NS | NS | +150 |
| EPDM 70 IRHD EPDM 80 IRHD | +120 -50 | +150 -50 | NS | NS | +60 | +80 | +80 |
| VMQ 70 IRHD Silicone | +200 -55 | +250 -55 | NS | NS | NS | NS | NS |
| HNBR 75 IRHD Hydrogenated nitrile | +130 -30 | +150 -30 | +60 | +60 | +60 | NS | NS |
| IIR Butyl | +120 -40 | +140 -40 | NS | NS | +60 | +100 | +120 |
| FFKM Perfluoro-elastomer | +200 -20 | +300 -40 | +60 | +60 | +60 | +100 | +150 |
| AU Polyester PU | +100 -30 | +110 -30 | +40 | +40 | NS | NS | NS |
| EU Polyether PU | +100 -40 | +110 -45 | +60 | +60 | +40 | NS | NS |
| Polyester elastomer | +100 -40 | +120 -40 | +60 | +60 | NS | NS | NS |
| PA Polyamide | +100 -40 | +120 -40 | +60 | +60 | +60 | +100 | +100 |
| POM Acetal | +100 -45 | +120 -40 | +60 | +60 | +60 | +100 | +100 |
| PPS Polyphenylene sulphide | +200 -40 | +200 -40 | +60 | +60 | +60 | +100 | +150 |
| PTFE Polytetra-fluoroethylene | +200 -200 | +200 -200 | +60 | +60 | +60 | +100 | +150 |
| Thermosetting Polyester Resin | +100 -50 | +130 -200 | +60 | +60 | +40 | +100 | +100 |
| PEEK Polyether-etherketone | +250 -65 | +300 -65 | +60 | +60 | +60 | +100 | +150 |
| Materials | Continual material service temperature range C | Intermitent material service temperature range C | ISO 6743-4 HETG-Fluids (vegetable oil based) | ISO 6743-4 HEES-Fluids (synthetic ester based) | ISO 6743-4 HEPG-Fluids (synthetic glycol based) | ISO 6743-4 HEPR-Fluids (synthetic hydrocarbons) |
|---|---|---|---|---|---|---|
| +60 -10 | +100 -40 | +100 -50 | +150 -50 | |||
| Maximum continous service temperature in fluids °C | ||||||
| NBR 70 IRH NBR 90 IRHD Nitrile (medium) | +100 -30 | +120 -30 | +60 | +60 | +60 | +100 |
| FKM 75 IRHD FKM 90 IRHD Fluoro-elastomer | +200 -20 | +250 -20 | +60 | +100 | +80 | +105 |
| EPDM 70 IRHD EPDM 80 IRHD | +120 -50 | +150 -50 | NS | NS | NS | NS |
| VMQ 70 IRHD Silicone | +200 -55 | +250 -55 | NS | NS | NS | * |
| HNBR 75 IRHD Hydrogenated nitrile | +130 -30 | +150 -30 | +60 | +60 | +80 | +130 |
| IIR Butyl | +120 -40 | +140 -40 | NS | NS | NS | NS |
| FFKM Perfluoro-elastomer | +200 -20 | +300 -40 | +60 | +100 | +100 | +150 |
| AU Polyester PU | +100 -30 | +110 -30 | +60 | +60 | +60 | +100 |
| EU Polyether PU | +100 -40 | +110 -45 | +60 | +80 | +60 | +100 |
| Polyester elastomer | +100 -40 | +120 -40 | +60 | +80 | +60 | +100 |
| PA Polyamide | +100 -40 | +120 -40 | +60 | +100 | +100 | +100 |
| POM Acetal | +100 -45 | +120 -40 | +60 | +100 | +100 | +100 |
| PPS Polyphenylene sulphide | +200 -40 | +200 -40 | +60 | +100 | +100 | +150 |
| PTFE Polytetra-fluoroethylene | +200 -200 | +200 -200 | +60 | +100 | +100 | +150 |
| Thermosetting Polyester Resin | +100 -50 | +130 -200 | +60 | +100 | +100 | +100 |
| PEEK Polyether-etherketone | +250 -65 | +300 -65 | +60 | +100 | +100 | +150 |
| Materials | Continual material service temperature range C | Intermitent material service temperature range C | Water (1) | Air | Brake Fluids |
|---|---|---|---|---|---|
| +60 -5 | +200 +2 | +130 -50 | |||
| Maximum continous service temperature in fluids °C | |||||
| NBR 70 IRH NBR 90 IRHD Nitrile (medium) | +100 -30 | +120 -30 | +80 | +100 | NS |
| FKM 75 IRHD FKM 90 IRHD Fluoro-elastomer | +200 -20 | +250 -20 | +100 | +200 | NS |
| EPDM 70 IRHD EPDM 80 IRHD | +120 -50 | +150 -50 | +120 | +120 | +120 |
| VMQ 70 IRHD Silicone | +200 -55 | +250 -55 | +100 | +200 | +80 |
| HNBR 75 IRHD Hydrogenated nitrile | +130 -30 | +150 -30 | +130 | +130 | NS |
| IIR Butyl | +120 -40 | +140 -40 | +120 | +120 | +80 |
| FFKM Perfluoro-elastomer | +200 -20 | +300 -40 | +150 | +200 | +130 |
| AU Polyester PU | +100 -30 | +110 -30 | +40 | +40 | NS |
| EU Polyether PU | +100 -40 | +110 -45 | +60 | +80 | NS |
| Polyester elastomer | +100 -40 | +120 -40 | +60 | +80 | NS |
| PA Polyamide | +100 -40 | +120 -40 | +60 | +80 | +80 |
| POM Acetal | +100 -45 | +120 -40 | +80 | +80 | +80 |
| PPS Polyphenylene sulphide | +200 -40 | +200 -40 | +150 | +200 | +130 |
| PTFE Polytetra-fluoroethylene | +200 -200 | +200 -200 | +150 | +200 | +130 |
| Thermosetting Polyester Resin | +100 -50 | +130 -200 | +80 | +100 | NS |
| PEEK Polyether-etherketone | +250 -65 | +300 -65 | +150 | +200 | +130 |
