80

The Hallite 80 double-acting swivel seal, or rotary pressure seal, is designed specifically for use in hydraulic swivel joints with an internal rotating rod, particularly in housings to Asian design. This design is a one-piece seal that can replace the two part seals typically used in this application.

The Hallite 80 has a moulded groove in the dynamic face to improve sealing against the surface while trapping lubrication and reducing the surface contact area and thereby reducing running friction. Special pressure activation grooves are incorporated into design of the seal to enable an immediate seal of the joint.

The Hallite 80 is manufactured in Hythane® 181, Hallite’s high-performance polyurethane, for easy installation, excellent low temperature performance, and long service life.

  • Unit of measurement:
Unit of measurement:

Max pressure

350 Bar

Temp range

-30°C
80°C

Max speed

0.1m/sec
Key:
  • Recomended
  • Possible
  • Not Suitable

* For fluid types marked as possible, please call our team of experts on +39 (0)58 642 8287 to talk through your requirements and determine if this seal is the most suitable for your needs.

  Dynamic application Static application
Fluids based on mineral oil    
Any Recommended Possible
Waterbased fluids    
HFA (5/95) Possible Possible
HFB (60/40 invert emulsion) Possible Possible
HFC (water glycol) Possible Possible
Water Possible Possible
Other fluid types    
Air/Nitrogen Possible Possible
HFD (Phosphate ester ARYL Type) Not suitable Not suitable
Synthetic esters (HEES, HFDU) Recommended Possible