764

The Hallite 764 double-acting piston seal is a compact, low friction seal for light to medium duty applications. The advanced face geometry gives the Hallite 764 single-acting capabilities making it an excellent choice for double-acting applications where minimal dynamic leakage is required.

The Hallite 764 is comprised of a tough, wear resistance-thermoplastic polyurethane face seal which is pre-loaded by a NBR O-ring. The housing width allows a narrow width piston to be used.

We recommend that an adequate bearing, such as the Hallite 506 or 87 bearing strip, is mounted on one or both sides of the seal. For further details of bearing grooves, please refer to the appropriate product data sheet.

  • Unit of measurement:
Unit of measurement:

Max pressure

250 Bar

Temp range

-30°C
110°C

Max speed

1m/sec
Key:
  • Recomended
  • Possible
  • Not Suitable

* For fluid types marked as possible, please call our team of experts on +39 (0)58 642 8287 to talk through your requirements and determine if this seal is the most suitable for your needs.

  Dynamic application Static application
Fluids based on mineral oil    
Any Recommended Recommended
Waterbased fluids    
HFA (5/95) Not suitable Not suitable
HFB (60/40 invert emulsion) Not suitable Not suitable
HFC (water glycol) Not suitable Not suitable
Water Not suitable Not suitable
Other fluid types    
Air/Nitrogen Possible Possible
HFD (Phosphate ester ARYL Type) Not suitable Not suitable
Synthetic esters (HEES, HFDU) Recommended Recommended