Characteristics and performance

The Hallite 764 double-acting piston seal is a compact, low friction seal for light to medium duty applications. The advanced face geometry gives the Hallite 764 single-acting capabilities making it an excellent choice for double-acting applications where minimal dynamic leakage is required.

Comprised of a tough, wear resistance-thermoplastic polyurethane face seal which is pre-loaded by a NBR O-ring, the housing width allows a narrow width piston to be used.

Product details

We recommend that an adequate bearing, such as the Hallite 506 or 87 bearing strip, is mounted on one or both sides of the seal. For further details of bearing grooves, please refer to the appropriate product data sheet.

Ask an expert

Max pressure *

250 Bar

Temp range


Max speed


* Max pressure stated is dependant on the material variant selected. Please consult the datasheet for further information.

  • Recomended
  • Possible
  • Not suitable

* For fluid types marked as possible, please call our team of experts on +44 208 941 2244 to talk through your requirements and determine if this seal is the most suitable for your needs.

  Dynamic application Static application
Fluids based on mineral oil    
Any Recommended Recommended
Waterbased fluids    
HFA (5/95) Not suitable Not suitable
HFB (60/40 invert emulsion) Not suitable Not suitable
HFC (water glycol) Not suitable Not suitable
Water Not suitable Not suitable
Other fluid types    
Air/Nitrogen Possible Possible
HFD (Phosphate ester ARYL Type) Not suitable Not suitable
Synthetic esters (HEES, HFDU) Recommended Recommended