Swivel Seals
Swivel seals are designed for slow rotary applications, such as the hydraulic swivels, which allow the transmission of pressurised services between the chassis and body of mobile hydraulic equipment.
Swivel seals are designed for slow rotary applications, such as the hydraulic swivels, which allow the transmission of pressurised services between the chassis and body of mobile hydraulic equipment.
![]() ![]() 310Max pressure300 Bar
Temp range-30°C
100°C
Max speed0.5m/sec
The Hallite 310 rotary pressure seal is designed specifically for use in hydraulic swivel joints. This has been superseded as a product group. Equivalent parts can be found in the new SSR product datasheet from the Armorlene® PTFE product catalogue. SSR Product Page SSR PDF Datasheet |
310 |
Max pressure | 300 Bar |
Temp range | -30°C to 100°C |
Max speed | 0.5m/sec |
![]() ![]() 80Max pressure350 Bar
Temp range-30°C
80°C
Max speed0.1m/sec
The Hallite 80 double-acting swivel seal, or rotary pressure seal, is designed specifically for use in hydraulic swivel joints with an internal rotating rod, particularly in housings to Asian design. This design is a one-piece seal that can replace the two part seals typically used in this application. The Hallite 80 has a moulded groove… |
80 |
Max pressure | 350 Bar |
Temp range | -30°C to 80°C |
Max speed | 0.1m/sec |
![]() ![]() 800 BoreMax pressure350 Bar
Temp range-30°C
80°C
Max speed0.2m/sec
The Hallite 800 double-acting swivel seal, or rotary pressure seal, is designed specifically for use in hydraulic swivel joints for either rod or bore sealing applications. The Hallite 800’s patented design minimises friction between the seal and the rod or bore mating surface. Depending on size, the seal is either a one-piece design or has… |
800 Bore |
Max pressure | 350 Bar |
Temp range | -30°C to 80°C |
Max speed | 0.2m/sec |
![]() ![]() 800 RodMax pressure350 Bar
Temp range-30°C
80°C
Max speed0.2m/sec
The Hallite 800 double-acting swivel seal, or rotary pressure seal, is designed specifically for use in hydraulic swivel joints for either rod or bore sealing applications. The Hallite 800’s patented design minimises friction between the seal and the rod or bore mating surface. Depending on size, the seal is either a one-piece design or has… |
800 Rod |
Max pressure | 350 Bar |
Temp range | -30°C to 80°C |
Max speed | 0.2m/sec |
![]() ![]() SSPMax pressure300 Bar
Temp range-45°C
200°C
Max speed2m/sec
The Hallite SSP is a double-acting, o-ring energized, rotary swivel seal designed to be used to seal outer diameters of shafts, bores, swivels, and other applications with rotating or oscillating movement. The SSP rotary seal has one or two machined grooves in the face ring, depending on the face-ring cross-section, that function to improve sealing… |
SSP |
Max pressure | 300 Bar |
Temp range | -45°C to 200°C |
Max speed | 2m/sec |
![]() ![]() SSRMax pressure300 Bar
Temp range-45°C
200°C
Max speed2m/sec
The Hallite SSR is a double-acting, o-ring energized, rotary swivel seal designed to be used to seal inner diameters of shafts, rods, swivels, and other applications with rotating or oscillating movement. The SSR rotary seal has one or two machined grooves in the face ring, depending on the face ring cross-section, that function to improve… |
SSR |
Max pressure | 300 Bar |
Temp range | -45°C to 200°C |
Max speed | 2m/sec |