The Hallite 831 single lipped, snap-in rod wiper is designed to fit metric housings and is interchangeable with many common European wiper styles. The proportions of the wiping lip ensure that contact is maintained with the surface of the rod to remove all deposits of mud and other forms of contamination except for those found in heavy-duty industrial applications.

The outside diameter of the seal incorporates a crush lip to provide interference fit with the housing and a face bead to ensure that the crush lip is not trapped in the corner of the housing. These features help prevent contaminant from entering the groove.

The moulded ribs on the internal diameter provide extra stability to the wiper and help prevent the possibility of blow-out due to pressure trapping between the wiper and the main rod seal.

The Hallite 831 is moulded in polyurethane for maximum wear resistance and performance.

  • Unit of measurement:
Unit of measurement:

Temp range


Max speed

  • Recomended
  • Possible
  • Not Suitable

* For fluid types marked as possible, please call our team of experts on 1-800-668-7970 to talk through your requirements and determine if this seal is the most suitable for your needs.

  Dynamic application Static application
Fluids based on mineral oil    
Any Recommended Possible
Waterbased fluids    
HFA (5/95) Recommended Possible
HFB (60/40 invert emulsion) Recommended Possible
HFC (water glycol) Possible Possible
Water Recommended Possible
Other fluid types    
Air/Nitrogen Recommended Possible
HFD (Phosphate ester ARYL Type) Not suitable Not suitable
Synthetic esters (HEES, HFDU) Recommended Possible