653

The Hallite 653 single-acting rod buffer seal is designed to be used in conjunction with a high-performance rod seal, such as the Hallite 605 and 621, to protect the primary seal from shock pressure loading and high frequency pressure spikes in the hydraulic system. The design allows oil to pass through to the rod seal while holding back pressure spikes. The Hallite 653 is a patented product (European patent no. 0427554BI; U.S.A. patent no. 5088747) that also allows pressure to pass back into the system preventing a pressure trap between the rod seal and the buffer seal. The Hallite 653 is an excellent pressure buffer option in heavy-duty applications and offers extended sealing system life and performance.

The Hallite 653 is also interchangeable with common PTFE buffer seal housings.

The Hallite 653 is moulded in Hythane® 181, Hallite’s high-performance polyurethane, for easy installation and excellent low temperature performance. The Hallite 653 is also offered in a number of other high-performance polyurethanes, such as the Hythane® 361.

The design also incorporates a polyacetal anti-extrusion ring to provide maximum
extrusion resistance against shock pressure loads.

  • Unit of measurement:
Unit of measurement:

Max pressure

700 Bar

Temp range

-45°C
110°C

Max speed

1m/sec
Key:
  • Recomended
  • Possible
  • Not Suitable

* For fluid types marked as possible, please call our team of experts on 1-800-668-7970 to talk through your requirements and determine if this seal is the most suitable for your needs.

  Dynamic application Static application
Fluids based on mineral oil    
Any Recommended Not suitable
Waterbased fluids    
HFA (5/95) Not suitable Not suitable
HFB (60/40 invert emulsion) Not suitable Not suitable
HFC (water glycol) Not suitable Not suitable
Water Not suitable Not suitable
Other fluid types    
Air/Nitrogen Not suitable Not suitable
HFD (Phosphate ester ARYL Type) Not suitable Not suitable
Synthetic esters (HEES, HFDU) Possible Not suitable