Characteristics and performance

The Hallite 533 is capable of withstanding high side loads and preventing metal-to-metal contact between the piston and the bore or the rod and the gland.

The PA 533 material is heat stabilised 33% glass reinforced nylon 66, which offers excellent bearing properties. The material is compatible with hydraulic and lubricating oils. The PA 533 material is not recommended for use in water based fluids (HFA) or where significant water is present, due to the swell of the nylon. For these applications Hallite recommends the use of Hallite 506, Hallite 708, or Hallite 63 bearings.

The Hallite 533 is available in molded rings. The rectangular section strip is available in a wide range of inch and some metric sizes which are available upon request.

Product details

If you cannot find the size you are looking for, please contact your local Hallite sales office for additional size information.

Ask an expert

Temp range

-40°C
120°C

Max speed

5m/sec

* Max pressure stated is dependant on the material variant selected. Please consult the datasheet for further information.

Key:
  • Recomended
  • Possible
  • Not suitable

* For fluid types marked as possible, please call our team of experts on 1-800-668-7970 to talk through your requirements and determine if this seal is the most suitable for your needs.

 Dynamic applicationStatic application
Fluids based on mineral oil  
AnyRecommendedPossible
Waterbased fluids  
HFA (5/95)Not suitableNot suitable
HFB (60/40 invert emulsion)Not suitableNot suitable
HFC (water glycol)Not suitableNot suitable
WaterNot suitableNot suitable
Other fluid types  
Air/NitrogenPossiblePossible
HFD (Phosphate ester ARYL Type)RecommendedPossible
Synthetic esters (HEES, HFDU)RecommendedPossible