Characteristics and performance
The Hallite 533 is capable of withstanding high side loads and preventing metal-to-metal contact between the piston and the bore or the rod and the gland.
The PA 533 material is heat stabilised 33% glass reinforced nylon 66, which offers excellent bearing properties. The material is compatible with hydraulic and lubricating oils. The PA 533 material is not recommended for use in water based fluids (HFA) or where significant water is present, due to the swell of the nylon. For these applications Hallite recommends the use of Hallite 506, Hallite 708, or Hallite 63 bearings.
The Hallite 533 is available in molded rings. The rectangular section strip is available in a wide range of inch and some metric sizes which are available upon request.
If you cannot find the size you are looking for, please contact your local Hallite sales office for additional size information.Ask an expert
* Max pressure stated is dependant on the material variant selected. Please consult the datasheet for further information.
- Not suitable
* For fluid types marked as possible, please call our team of experts on (02) 8886 1600 to talk through your requirements and determine if this seal is the most suitable for your needs.
|Dynamic application||Static application|
|Fluids based on mineral oil|
|HFA (5/95)||Not suitable||Not suitable|
|HFB (60/40 invert emulsion)||Not suitable||Not suitable|
|HFC (water glycol)||Not suitable||Not suitable|
|Water||Not suitable||Not suitable|
|Other fluid types|
|HFD (Phosphate ester ARYL Type)||Recommended||Possible|
|Synthetic esters (HEES, HFDU)||Recommended||Possible|