Characteristics and performance
Design O-Rings are a simple but very versatile seal. They are most commonly used for static applications, and for pressures over 1500 p.s.i are used with back up rings. O-Rings in NBR and FKM are suitable for use in mineral oil, water and air, FKM O-Rings are also suitable for use in most aggressive fluids and in temperatures of up to 200°C/390°F.
Product details
O-Rings with sizes to AS-568A are available in NBR 70 and 90 Shore A compounds and in FKM 75 Shore A.
To view our O-Ring range including part numbers and technical data, please download the supplied datasheet by clicking here.
For further information about our O-Ring products, please contact your local Hallite sales office.
Ask an expert
Temp range
* Max pressure stated is dependant on the material variant selected. Please consult the datasheet for further information.
- Recomended
- Possible
- Not suitable
* For fluid types marked as possible, please call our team of experts on +39 (0)58 642 8287 to talk through your requirements and determine if this seal is the most suitable for your needs.
| Dynamic application | Static application | |
|---|---|---|
| Fluids based on mineral oil | ||
| Any | Possible | Recommended |
| Waterbased fluids | ||
| HFA (5/95) | Not suitable | Possible |
| HFB (60/40 invert emulsion) | Not suitable | Possible |
| HFC (water glycol) | Not suitable | Possible |
| Water | Not suitable | Possible |
| Other fluid types | ||
| Air/Nitrogen | Possible | Recommended |
| HFD (Phosphate ester ARYL Type) | Not suitable | Not suitable |
| Synthetic esters (HEES, HFDU) | Not suitable | Recommended |
