Characteristics and performance
The Hallite 661 polyurethane cushion seal for pneumatic applications is designed to cushion the stroke of the piston in pneumatic cylinders by acting as a non-return valve.
Near the end of the cylinder stroke the cushion spear enters the seal and pushes it against the radial housing wall to trap air between it and the piston decelerating the piston in the process. When pressure is applied to the system to return the piston, specially designed venting grooves allow pressure to pass over the Hallite 661 to the piston.
The Hallite 661 is manufactured in Hythane® 181, Hallite’s high-performance polyurethane, for easy installation, excellent low temperature performance, and long service life.
Product details
Ask an expertMax pressure *
Temp range
Max speed
* Max pressure stated is dependant on the material variant selected. Please consult the datasheet for further information.
- Recomended
- Possible
- Not suitable
* For fluid types marked as possible, please call our team of experts on 1-800-668-7970 to talk through your requirements and determine if this seal is the most suitable for your needs.
Dynamic application | Static application | |
---|---|---|
Fluids based on mineral oil | ||
Any | Not suitable | Not suitable |
Waterbased fluids | ||
HFA (5/95) | Not suitable | Not suitable |
HFB (60/40 invert emulsion) | Not suitable | Not suitable |
HFC (water glycol) | Not suitable | Not suitable |
Water | Not suitable | Not suitable |
Other fluid types | ||
Air/Nitrogen | Recommended | Not suitable |
HFD (Phosphate ester ARYL Type) | Not suitable | Not suitable |
Synthetic esters (HEES, HFDU) | Not suitable | Not suitable |