846

The Hallite 846 double-lipped, snap-in rod wiper is developed specifically for cylinders applications on mechanical handling equipment, particularly those with long stroke, and designed for use with venting U-rings, such as the Hallite 663 or Hallite 673 rod seal. The design minimises the oil transfer out of the ram on the cylinder rod by collecting traces of fluid passing the rod seal.

The unique feature of the Hallite 846 is the Umbrella Wiper Technology, which is a protective debris guard flap on the wiping lip that entirely covers the gland housing and prevents the water/slurry trap that is common with conventional wipers. This feature offers added protection to the integrity of the hydraulic system by reducing corrosion and preventing the ingress of contamination into the wiper housing groove and hydraulic cylinder gland which will result in increased system life.

Another special feature of the Hallite 846 wiper design is the thin membranes which burst when excessive fluid pressure is trapped between the wiper and the rod seal. This prevents pressure from ejecting the wiper out of its housing. After release of this pressure, the membranes close to protect against contamination from the outside without the need for an expensive vent hole in the gland.

The Hallite 846 is moulded in Hythane® 181, Hallite’s high-performance polyurethane, for easy installation and excellent low temperature performance and has a textured wiping lip to provide improved dry rod performance, particularly for long stroking cylinder applications.

  • Unit of measurement:
Unit of measurement:

Temp range

-45°C
110°C

Max speed

4m/sec
Key:
  • Recomended
  • Possible
  • Not Suitable

* For fluid types marked as possible, please call our team of experts on +91 80 2372 6000 to talk through your requirements and determine if this seal is the most suitable for your needs.

  Dynamic application Static application
Fluids based on mineral oil    
Any Recommended Possible
Waterbased fluids    
HFA (5/95) Possible Possible
HFB (60/40 invert emulsion) Possible Possible
HFC (water glycol) Possible Possible
Water Possible Possible
Other fluid types    
Air/Nitrogen Possible Possible
HFD (Phosphate ester ARYL Type) Not suitable Not suitable
Synthetic esters (HEES, HFDU) Recommended Possible