Characteristics and performance
The Hallite 533G bearing is a version of the Hallite 533, which has axial grooves to allow fluid bypass. This bearing is most often used in hydraulic ram application where such a feature is required. Like the standard 533 bearing the 533G is compatible with hydraulic and lubricating oil. It is not suitable for use in applications where water based fluids are used, nor is it suitable in applications where significant water is present, because of the swell of the nylon.
- Moulded to size
- Easy installation
- Long life
B indicates butt cut
S indicates scarf cut
NB Some sizes are rod specific only
Note: Metric sizes are also available upon request. For further information about these and any other sizes that you are looking for, please contact your local Hallite sales office.Ask an expert
* Max pressure stated is dependant on the material variant selected. Please consult the datasheet for further information.
- Not suitable
* For fluid types marked as possible, please call our team of experts on +91 80 2372 6000 to talk through your requirements and determine if this seal is the most suitable for your needs.
|Dynamic application||Static application|
|Fluids based on mineral oil|
|HFA (5/95)||Not suitable||Not suitable|
|HFB (60/40 invert emulsion)||Not suitable||Not suitable|
|HFC (water glycol)||Not suitable||Not suitable|
|Water||Not suitable||Not suitable|
|Other fluid types|
|HFD (Phosphate ester ARYL Type)||Recommended||Possible|
|Synthetic esters (HEES, HFDU)||Recommended||Possible|