416 Rod Buffer Seal

The Hallite 416 is a buffer seal developed to work in conjunction with high performance rod seals, such as the Hallite 605 and 621.

It has a bronze filled PTFE ring with a pre-loaded lip energised by an O-Ring. Theseal is designed to protect the primary rod seal from pressure spikes in the cylinder. It has a self relieving design in order to prevent excessive pressure build up in the cavity between the buffer seal and the rod seal.

The special PTFE ring has the low frictional properties normally associated with this material but is strenthened by additives to reduce creep. It has a low breakout friction so stick slip is eliminated.

Standard seals are supplied with a nitrile O-Ring but other materials can be provided.

The PTFE ring should always be mounted with the internal step on the pressure side. Sizes above 30mm are easily installed by deforming the PTFE ring into a kidney shape. Sizes under 30mm are best installed using a tool, details of which can be provided.

  • Unit of measurement:
Unit of measurement:

Max pressure

300 Bar

Temp range

-30°C
100°C

Max speed

4m/sec
Key:
  • Recomended
  • Possible
  • Not Suitable

* For fluid types marked as possible, please call our team of experts on +1 248-668-5200 to talk through your requirements and determine if this seal is the most suitable for your needs.

  Dynamic application Static application
Fluids based on mineral oil    
Any Recommended Possible
Waterbased fluids    
HFA (5/95) Possible Possible
HFB (60/40 invert emulsion) Possible Possible
HFC (water glycol) Possible Possible
Water Possible Possible
Other fluid types    
Air/Nitrogen Possible Not suitable
HFD (Phosphate ester ARYL Type) Not suitable Not suitable
Synthetic esters (HEES, HFDU) Recommended Possible