Characteristics and performance

The Hallite SSR is a double-acting, o-ring energized, rotary swivel seal designed to be used to seal inner diameters of shafts, rods, swivels, and other applications with rotating or oscillating movement. The SSR rotary seal has one or two machined grooves in the face ring, depending on the face ring cross-section, that function to improve sealing against the surface while trapping lubrication and reducing surface contact area, thereby reducing running friction. The o-ring serves to energize the seal face ring, exerting a designed downward force, and also provides static sealing of the housing.

This seal has a specially designed circular inner recess that provides for maximum o-ring contact area to the inner diameter of the seal face, thereby minimizing the possibility of sealing components spinning relative to each other. The standard SSR seal face includes pressure notches, which makes the seal very responsive to changes in pressure. Made from exclusive Hallite Armorlene® 711 or HCF PTFE materials, the SSR rotary seal is energy-efficient due to its low-friction qualities and eliminates any potential sticking on start-up.

High-performance Armorlene® materials, like 711, provide outstanding wear resistance and support a large range of temperature and media compatibilities. The SSR rotary swivel seal is designed for slow-speed rotary and swivel applications.

Product details

The part numbers listed below only show standard material options for both the face seal and energizer, where applicable. For a complete list of the material and energizer options along with part numbering structure, please see the complete PDF datasheet or click SSR Data Tables.
Ask an expert

Max pressure *

300 Bar

Temp range

-45°C
200°C

Max speed

2m/sec

* Max pressure stated is dependant on the material variant selected. Please consult the datasheet for further information.

Key:
  • Recomended
  • Possible
  • Not suitable

* For fluid types marked as possible, please call our team of experts on +1 248-668-5200 to talk through your requirements and determine if this seal is the most suitable for your needs.

 Dynamic applicationStatic application
Fluids based on mineral oil  
AnyRecommendedPossible
Waterbased fluids  
HFA (5/95)PossiblePossible
HFB (60/40 invert emulsion)PossiblePossible
HFC (water glycol)PossiblePossible
WaterPossiblePossible
Other fluid types  
Air/NitrogenPossibleNot suitable
HFD (Phosphate ester ARYL Type)Not suitableNot suitable
Synthetic esters (HEES, HFDU)RecommendedPossible