Characteristics and performance
The Type 540 material is used in Dynamic Seals’ precision bearing rings, both the heavy wall machined bearings used as replacements for bronze, cast iron, powered metal and phenolic materials where compression strength and low moisture absorption are key requirements, and as thinner wall parts where tighter tolerances and dimensions stability in an as-molded part are of paramount importance.
Product details
The Type 540 material is a general purpose heat stabilized, lubricated, type 66 nylon reinforced with 40% mineral that encompasses a high aspect ration particle shape.
Ask an expert
* Max pressure stated is dependant on the material variant selected. Please consult the datasheet for further information.
- Recomended
- Possible
- Not suitable
* For fluid types marked as possible, please call our team of experts on (02) 8886 1600 to talk through your requirements and determine if this seal is the most suitable for your needs.
| Dynamic application | Static application | |
|---|---|---|
| Fluids based on mineral oil | ||
| Any | Recommended | Possible |
| Waterbased fluids | ||
| HFA (5/95) | Not suitable | Not suitable |
| HFB (60/40 invert emulsion) | Not suitable | Not suitable |
| HFC (water glycol) | Not suitable | Not suitable |
| Water | Not suitable | Not suitable |
| Other fluid types | ||
| Air/Nitrogen | Recommended | Possible |
| HFD (Phosphate ester ARYL Type) | Recommended | Possible |
| Synthetic esters (HEES, HFDU) | Recommended | Possible |
