Characteristics and performance

The Hallite 714 double-acting piston seal is a compact seal for medium to heavy-duty applications.

In double-acting telescopic cylinders or phasing cylinders, the seal’s reinforced, heat-stabilized, thermoplastic sealing face with step-cut joint is an ideal choice because it allows the seal to pass over ports without damage. The rugged, extrusion resistant design also performs extremely well in high-pressure off-highway and earth-moving applications where the seal face can tolerate the large extrusion gaps which are required to prevent piston-to-bore contact.

The abrasion resistant glass-filled nylon (GFN) face seal material allows the seal to work well on super smooth inside diameter (SSID) as drawn tube. The precision moulded face has chamfers which coupled with a profiled NBR expander allows for easier cylinder assembly.

Product details

The expander material comes in a number of material options to extend operating conditions. Contact your local Hallite technical team to decide which is best for your application.

Ask an expert

Max pressure *

500 Bar

Temp range


Max speed


* Max pressure stated is dependant on the material variant selected. Please consult the datasheet for further information.

  • Recomended
  • Possible
  • Not suitable

* For fluid types marked as possible, please call our team of experts on +49 (0)40 73 47 48-0 to talk through your requirements and determine if this seal is the most suitable for your needs.

 Dynamic applicationStatic application
Fluids based on mineral oil  
AnyRecommendedNot suitable
Waterbased fluids  
HFA (5/95)Not suitableNot suitable
HFB (60/40 invert emulsion)Not suitableNot suitable
HFC (water glycol)Not suitableNot suitable
WaterNot suitableNot suitable
Other fluid types  
Air/NitrogenNot suitableNot suitable
HFD (Phosphate ester ARYL Type)Not suitableNot suitable
Synthetic esters (HEES, HFDU)RecommendedNot suitable